Wrexham Maelor Hospital – Wall Mounted Canopy

Hartshill Medical Centre in Nuneaton, Warwickshire is a £3m state of the art practice that was opened in early 2023, replacing the much smaller, nearby Chancery Lane Surgery. We were approached during the early stages to tender for an entrance canopy which would provide shade and shelter above the main entrance.

In November 2023, we supplied and installed a 4m x 3m Coniston Wall Mounted Canopy at the UHL-ED Transit Hub at Leicester Royal Infirmary in Leicester.

The canopy specification presented to Able Canopies was a wall mounted canopy with a polycarbonate roof and toughened glass or polycarbonate front panels.

The Royal Liverpool University Hospital in Merseyside were having a new state of the art facility built to replace their existing site which could no longer accommodate the demands the hospital was required to achieve.

In July 2024, we supplied and installed a 4m x 4m Banbury Waterproof Shade Sail at Throstle Nest Children's Home in Cranswick, East Yorkshire.

In March 2023, we supplied and installed a 5.5m x 3m  Coniston Freestanding Canopy with a Valley at The Grange University Hospital in Cwmbran, South Wales.

In June 2024, we supplied and installed a 6.7m x 3m Coniston Freestanding Canopy that goes into a valley then a  3m x 2.5m Coniston Freestanding Canopy at Warwickshire Hospital in Leamington Spa, Warwickshire.

In March 2023, we supplied and installed a 3.1m x 1.5m with hip into 1.41m x 1.5m Kensington Mono-Pitch Freestanding Canopy at Hartshill Medical Centre in Nuneaton, Warwickshire.

Hartshill Medical Centre in Nuneaton, Warwickshire is a £3m state of the art practice that was opened in early 2023, replacing the much smaller, nearby Chancery Lane Surgery. We were approached during the early stages to tender for an entrance canopy which would provide shade and shelter above the main entrance.

In November 2023, we supplied and installed a 4m x 3m Coniston Wall Mounted Canopy at the UHL-ED Transit Hub at Leicester Royal Infirmary in Leicester.

The canopy specification presented to Able Canopies was a wall mounted canopy with a polycarbonate roof and toughened glass or polycarbonate front panels.